Description Proposed Electrical Work in existing Chandpole Branch Premises at Jaipur Zonal Office, C-54, Sarojini Marg, C-Scheme, Jaipur-302001 TENDER DOCUMENT PROPOSED ELECTRICAL WORK IN CHANDPOLE BRANCH, JAIPUR. Last Date of Submission of Sealed Tender Up To 1400 Hours on 10.07.2010 Tender cost Rs.- 200/- Signature & Seal of the Contractor Particulars of Tender NOTE : 1 ) SBBJ’S Approved Eelectrical Contractors Empanelled under the category Rs 5.00 Lac & above are only eligible for participating in this tendering process. 2 ) The renovation work may be supervised by the Architect / Supervisor appointed by the Zonal office . ------------------------------------------------------------------------------------------------------------------------- Details of Work to be done : Interior Furnishing in SBBJ existing CHANDPOLE Branch Premises, Jaipur Form Of Contract : Item wise rate. Earnest Money : Rs. 7,000/- (Rupees Seven thousand only) in the form of Demand Draft in favour of State Bank Of Bikaner And Jaipur payable at Jaipur (EMD SHOULD BE SUBMITTED IN SEPARATE ENVELOPE SUPERSCRIBING THE NAME OF WORK) Period of Contract : 120 Days Last Date of submission of Sealed Tender : 10.07.2010 up to 1400 Hrs. Date of Opening of Tender : 10.07.2010 at 1600 Hrs. Period Of Completion : 15 (Fifteen) Days Defects Liability Period : 12 (Twelve) Months from the date of virtual completion. Agreed Liquidated Damages : a) 1.0% of the contract value for the first week. b) 2.0% of the contract value for the subsequent week(s) Subject to maximum of 10% of the contract value Cost of Tender Document : Rs. 200/-(Rupees two hundred only) through demand draft / Bankers cheque favoring SBBJ at Jaipur (Non-refundable). Estimated cost of work : Rs. 3 . 61 lacs Detailed tender documents can also be downloaded from the Bank’s website http://www.sbbjbank.com OR the website hosted by the NIC i.e. http://www.tenders.gov.in. While submitting tender a crossed demand draft of Rs. 200/- (Rupees two hundred only) (nonrefundable) to be enclosed against the cost of tender payable at Jaipur and drawn in favor of Asstt. General Manager, Region - I, SBBJ. Jaipur Zone, Jaipur. (For State Bank Of Bikaner & Jaipur) (Signature & Seal of the Contractor) GENERAL MAKE OF MATERIAL (For Electrical Tenders) All the materials should be branded & ISI marked as under S.No. Particulars and Specifications Approved Brand Make 1. Electrical Wires Finolex / Anchor / RR Kables/ Havels PVC Insulated Copper 2. Switches and Sockets Modular range – Anchor / Prokon / Leader/ Leon WIPRO / GE 3. Telephone wires Plaza/ Deltron/ Grandlay / Leader. 4. DB & MCB Havells / GE / Standard / C&S 5. PVC Conduit Berrillia / Jindal or equivalent. 6. Cables Glooter/ Polycab / Finolex / havels 7. Mirror Optics Philips / Bajaj / Wipro / havels 8. Down Lighter Philips / Bajaj / Wipro / havels 9. Wall Fan Usha / Bajaj / Crompton or equivalent. 10. Exaust Fan Usha / Bajaj / Crompton or equivalent. 11. Change over switch Havels / HPL 12. TPN switch Havels/ Standard/ EE 13. Patti Fittings Bajaj/ Surya/ Philips/ Crompton 14. Panel Parts VSS-Alfa/ AE VSS-CE / L&T Signature & Seal of the Contractor GENERAL SPECIFICATIONS OF MATERIAL ( For Interior Furnishing Tenders ) SN Particulars and Specifications Approved Make 1 Board – 19mm Commercial / Water proof (MR/BWR Grade ISI Approved) National / Kit / Jaupiter / LifeGold / Creative / Century / Mayur / Samrat / (ISI and ISO – 9001) or equivalent 2 Ply – all relevant thickness – Commercial / Water proof (MR/BWR Grade ISI Approved) Kit / National / Greenlam / Formica / Marino/ Century / (ISI and ISO – 9001) equivalent 3 Lamination – 1.5mm / 1.00 mm for partitions and wall paneling or otherwise as specified. Formica / Greenlam / Marino / Century / Bloom 4 Locks / Night Latches Godrej / 4 – C Acme 5 Hardware – hinges, door stoppers, drawer/ shutter handles etc. Everite / Reliance (as specified) 6 Hardware – catchers Magnetic – Heavy Duty 7 Hardware–channels Telescopic Channels 8 Hardware – Hydraulic door closers Approved make ISI mark 9 Enamel Paint Approved shade – ICI /Asian/Berger 10 Beadings – Relevant thickness As designed in Teak Wood 11 Glass – relevant thickness Float Glass – Modi / Atul / Tata /Ashi 12 Adhesive Fevicol Sh / Araldite 13 Electrical Wires Anchor / RR cables / Plaza / Havells 14 Switches and Sockets Modular range – Anchor/SSK/leader/Leon/Prokon 15 Telephone wires Plaza / Deltron / Leader / Grandlay 16 DB & MCB Havells / GE/MDS –lexic / Merlin Gerin 17 Conduits Polypack / jindal / AKG / setia 18 Bakelite sheet Hylem 19 Change over switches HPL / L & T 20 Switch fuse unit HPL / L & T 21 CAT 5 cables D-link /AT&T / Finolex 22 Cables Gloster / ICL/ Incab / Torrent 23 Light fixtures Philips / Bajaj / Usha 24 Ceiling – fans / Bracket fans / Wall mounting Fans Crompton / GEC / Usha / Bajaj / Newtek LETTER FROM CONTRACTOR TO THE ASSTT. GENERAL MANAGER - I, JAIPUR ZONE TO. THE ASSTT. GENERAL MANAGER REGION - I, STATE BANK OF BIKANER & JAIPUR ZONAL OFFICE, C-54 SAROJINI MARG, C-SCHEME, JAIPUR – 302005 Dear Sir, INTERIOR ELECTRICAL WORK IN SBBJ CHANDPOLE EXISTING BRANCH PREMISES AT JAIPUR. Having examined the specifications, conditions of the tender, form of item rate, contract, schedule of quantities relating to the above work and having visited and examined the site (Chandpole Branch at Jaipur) of the proposed works having acquired the requisite information relating to thereto as affecting the tender invited by you on behalf of the State Bank Of Bikaner & Jaipur (SBBJ). I / We, the undersigned hereby offer to execute the above proposed works on item rate basis in strict accordance with the contract conditions and specifications for the sum of Rs………………./-(Rupees …………………………………………………………………only) or such other sums may be ascertained in the accordance with the said contract. 2. I/We, undertake to complete and deliver the whole of the works within a stipulated period as specified in the contract conditions. I/We, shall be under obligation to pay the sum as stated in the conditions of the contract for every day that the works shall remain incomplete, damages, as compensation subject to the conditions of the contract relating to an extension of time. 3. I/We, enclose herewith my/our tender with Earnest Money remittance of Rs. 7,000/- (Rupees seven thousand only) in the form of demand draft in favor of AGM-I, State Bank Of Bikaner & Jaipur payable at Jaipur. I/We, hereby agree that this sum shall be forfeited by the SBBJ in the event of my/our tender being accepted and I/We fail to execute the contract when called upon to do so. 4. In the event of the tender being accepted: I/We, agree for retaining the EMD amount as a part of the security deposit. Further, I/We agree that 10% of the gross amount of each running bills shall be deducted and accumulated till the sum along with the sum already deposited as EMD equals the total security deposit as per clause of the conditions of the contract. Yours faithfully, SIGNATURE OF THE CONTRACTOR (With official seal) GENERAL RULES AND INSTRUCTIONS FOR THE GUIDANCE OF TENDERERS TENDER FOR INTERIOR ELECTRICAL WORK IN SBBJ. CHANDPOLE BRANCH AT JAIPUR. 1. Tenders are hereby invited on behalf of the State Bank of Bikaner & Jaipur (herein after called as SBBJ) for the proposed interior Electrical work in Chandpole Branch , Jaipur at an estimated cost of Rs. 3.61 lacs. 2. Sealed tenders should be addressed to the Asstt. General Manager, Region – I, State Bank of Bikaner & Jaipur, Zonal Office, C-54, Sarojini Marg, C-Scheme, Jaipur and super scribed for the proposed interior Electrical work in Chandpole Branch at Jaipur, so as to reach him not later than 10.07.2010 up to 1400 Hrs. 3. The tenderer shall deposit with SBBJ Rs. 7,000/- (Rupees seven thousand only) by demand draft as Earnest Money which amount shall be forfeited in the event of refusal or delay in signing the contract within seven days (or within a day in case for some urgent works) from the date of issue of acceptance letter for tender. The EMD of unsuccessful tenderers will be returned without any interest, after a decision is taken regarding the award of the contract. The earnest money of the successful tenderer shall be adjusted towards security deposit. A tender not accompanied with the requisite earnest money in demand draft shall stand rejected. 4. EMD of Rs. 7,000/- (Rupees seven thousand only) should be submitted in separate envelope super scribing the name of the work. 5. The tenderer shall not make any correction / alteration / additions / omissions on these documents. 6. The tenderer must obtain for himself on his own responsibility and at his own expenses all the information’s which may be necessary for the purpose of filling this tender and for entering into a contract for the execution of the same and must examine the drawings and inspect the site of the work and acquaint himself with local conditions and matters pertaining thereto, nature and requirements of the works facilities of transport condition, access and storage of material. The tenderer shall provide in their tender for cost of carriage, freight and other charges as also for any special difficulties and including police restriction for transport etc. for proper execution of the works as indicated in the drawings. The successful tenderer will not be entitled to any claim of compensation for difficulties faced or losses incurred on account of any site condition which existed before the commencement of the work or which in the opinion of the Bank might have deemed to have reasonably been inferred to be so existing before commencement of work. 7. The contractor should quote the rates in figures as well as in words. The amount for each item should be worked out and the requisite totals given. 8. All rates shall be quoted on the proper form of the tender alone. 9. Special care should be taken to write the rates in figures as well as in words and the amounts in figures only, in such way that interpolation is not possible. The total amount should be written both in figures and in words. In case of figures, the words “Rs.” should be written before the figure of rupees and words “P” after the decimal figures, e.g. Rs. 2.15P. and in case of words, the “Rupees” should precede and the word “paise” should be written at the end, unless the rate is in whole rupees and followed by the words “only”, it should invariably be up to two decimal places. While quoting the rate in schedule of quantities, the word “only” should be written closely following the amount and it should not be written in the next line. 10. The acceptance of a tender will rest with the State Bank Of Bikaner & Jaipur which does not bind itself to accept the lowest tender, and reserves to itself the authority to reject any or all of the tenders received without the assignment of a reason. All tenders in which any of the prescribed conditions are not fulfilled or are incomplete in any respect are liable to be rejected. The Bank reserves the right to accept the tender in full or in part and the tenderer shall have no claim for revision of rates or other condition if his tender is accepted in parts. 11. Each of the tender documents / components is required to be signed by the person or persons submitting the tender in token of his having acquainted himself with all the conditions/ specifications as may be laid down. Any tender with any such document / paper not signed or with details marked as applied for shall be out rightly rejected. It will be obligatory on the part of tenderer to tender and sign and tender documents for all the component parts and that, after the work is awarded, he will have to enter into an agreement for each component with the competent authority in the Bank. CONDITIONAL TENDERS SHALL BE REJECTED. If any of the documents are missing or unsigned the tender shall be considered as invalid also rates not filled up in any item or marked as actual plus percentages shall make the tender as invalid and shall be rejected. 12. Any additions / alterations made while filling the tender must be attested by initials of the tenderer. Over writing of figures is not permitted. Failure to comply with either of these conditions will render the tender void. No advice or any change in rates or conditions after submission of the tender will be entertained. 13. Security deposit equivalent to 10% from each running bill shall be deducted. 50% of the security deposit shall be returned with the final bill payment and balance 50% after expiry of defect liability period of 12 months from the date of virtual completion as certified by the architect (if appointed by the bank for the project) / Bank’s Civil Engineer. Earnest Money Deposit would be adjusted with the security deposit in the final bill. Rates quoted are inclusive of all taxes, levies, duties and other charges such as freight, insurance, octroi, loading / unloading, moving the position in site etc. for complete item. 14. Within seven working days of the receipt of intimation from SBBJ of the acceptance of his / their tender, the successful tenderer shall be bound to implement the contract by signing an agreement in accordance with the terms and conditions of the contract, but the work order or the written acceptance by SBBJ of a tender will constitute a binding agreement between SBBJ and the contractors so tendering whether such a formal contract is or not subsequently entered into. 15. All compensation or other sums of money payable by the contractor to SBBJ under the terms of this contract may be deducted from the security deposit or from any other sum that may be or may become due to the contractor on any account whatsoever and in the event of the security deposit being reduced by reason of such deductions the contractor shall within 7 days of being asked to do so make good in cash or cheque any sum or sums which may have been deducted from his security deposit. 16. In case, where the same item of work is mentioned at more than one place in the schedule of quantities the lowest of the rates quoted by the contractor shall be taken into account for payment of the item. 17. The work should be completed within FIFTEEN DAYS from the date of the work order issued to the contractor to commence the work. If the contractor fails to complete the work by the scheduled date of completion or within any sanctioned extended time limit he will have to pay damages as stipulated for the period that the work remains incomplete. THE SAMPLES OF ALL THE MATERIALS , APPROVED MAKE /COLORS / SHADES AND WORK ITEMS SHALL BE GOT APPROVED FROM BANK’S ENGINEER BEFORE PROCEEDING FURTHER. The drawings contain sketches showing salient features, details at the various scale indicating extent of work and specifications to be followed. These can be modified by SBBJ from time to time in accordance with technical requirements at the site. 18. Any damage done to the property of SBBJ during execution of work shall be the responsibility of the contractor and it shall be made good by him at his cost to the entire satisfaction of SBBJ. The SBBJ shall have full powers to get the material or workmanship etc. inspected and tested by an independent agency for it’s soundness and adequacy at the cost of contractor. 19. The quantities contained in the schedule are approximate only. The work as actually carried out will be measured up from time to time for which payment shall be made subject to the terms and conditions of the contract. 20. No mobilization advance shall be released to the contractors at the start of work. Only one running payment shall be made to the contractor as per the work progress after verification of running bill by the Bank’s Civil Engineer. The final bill has to be verified by the Bank’s Civil Engineer. Tender shall be valid for a period of 120 days from the due date of its submission to SBBJ. However, the SBBJ will not be bound to accept the lowest or any tender and reserves the right to accept or reject any or all tenders either in whole or in part, without assigning any reason whatsoever. 21. All items of work mentioned in the schedule of quantities are to be deemed and paid as completed works in all respects and details including preparatory and finishing works involved directly, related to and reasonably detectable from the drawings, specifications and schedule of quantities and no further extra charge will be allowed in this connection. In the case of lump sum charges in the tender in respect of any item of works, the payment of such items of work will be made for actual work done on the basis of lump sum charges as will be assessed to be payable by SBBJ. 22. The tenderer should note that the tender is strictly on item rate basis and their attention is drawn on the fact that the rates for each and every item should be correct, workable and self-supporting and based on the specification schedule submitted herewith. Financial bids marked as percentages above or below the PWD BSR / CPWD BSR or any such other instrument would be summarily rejected. If called upon by SBBJ detailed analysis of any or all the rates will have to be submitted. The SBBJ is not bound to recognize the contractor’s analysis. Any plea regarding business secrets / contractors working confidentialities etc. would not be accepted and such tenders are liable to be rejected. 23. All designated material samples will be tested and inspected at contractor’s expense if desired by the Bank at designated laboratories. 24. The contractor shall conform to the provision of all local bye-laws and acts relating to the work and to the regulations etc. of the government and local authorities and of any company with whose system the building is supposed to be constructed. The contractor shall give all the notices required by the said act, rules and regulation and byelaws etc. and pay all charges/ fees payable to such authorities for execution of the work involved. The cost if any shall be deemed to have been included in his quoted rates, taking into account all liabilities for licenses, fees for footpath encroachment, restoration etc. and shall indemnify the employer against such liabilities and shall defend all actions arising from such claims of liabilities. 25. Certificates of purchase of company specified items/ units like chairs, tube lights, vertical blinds, electrical fixtures and fittings and any such other units as deemed necessary by the Engineer have to be attached by the contractors from the authorized distributors / dealers / company showroom along with the furnishing bills. 26. For any further drawings / details / clarifications please advice through the Bank. 27. Bank reserve the right to cancel or any of the tenders and can change / drop / reduce the quantities / items mentioned in the schedule at any time, before, placing of the order or even during execution. The decision of the Zonal Head in all matters pertaining to the work execution shall be final and binding. 28. The electrical / Air- Conditioning work will be examined by the Bank’s Electrical consultant / Electrical Engineer before making the final payment if needed. 29 Final bill will not be processed until rectification of defects / deviated items pointed out by the Bank’s Engineer. 30. Prior approval to be obtained in writing from the competent authority (concerned controller / Bank’s Engineer-in-charge) if, any changes / modifications / additions / alterations / omissions made in the design during the execution of work In case, out of tender / any extra work done at site without prior permission from the competent authority, the same will not be considered for the payment. 31. Any discount / rebates on rates should be written in FIGURES and IN WORDS as well to avoid any contradiction. 32. Canvassing in connection with tenders is strictly prohibited and the tenders submitted by the contractors who resort to canvassing will be liable to rejection. ----------------OOO------------------ :: G SCHEDULE :: Proposed Electrical work in SBBJ Chandpole Branch , Jaipur. S.NO. Item Unit Qty. Rate/ [Rs.] Rate In words Amount 1 2 3 4 ELECTRICAL WORKS: LIGHT & FAN POINTS: P/F light point in pvc conduit/casing caping. 1.5mm thkns & duly wired with 2.25 sq.mm pvc insulated copper wire along with 1.5 sq.mm pvc insulated wire for earthing including bends,nipples, junctions, M.S. switch boxes, switches etc.(with modular plates and switches) complete incl. all connections, testing Extension to existing points. also drop wire from ceiling rose to fixture shall be drawn in M.S. flexible pipe with suitable size glands etc. LIGHT POINTS : EXTENSIONS : AIR CONDITIONING POINTS P/F 20Amp. power points in pvc conduct/casing app. Thkns & duly wired with 6.0 Sq.mm.swg pvc insulated copper wire along with 2.5 Sq mm.SWG insulated wire for earthing including bends, nipples, junctions, M.S. switch boxes, and DPMCB 16/25 Amps complete incl. all connections & earth termination etc. DISTRIBUTION BOARDS P/F Sheet metal distribution boards and making necessary connections etc. complete. a) SPN 12 WayDB +10 mcb & one DPMCB 32/40A) ( for light circuit ). b) TPN 8 way DB +21 mcb + 4 pole MCB 63A ( for computer ) (With E.L.C.B. ) c) TPN 6 way DB for AC & power points + 4 pole MCB 100A + 4 pole MCB 40 A + 10 MCB SPN ( 16 to 32 Amp.) (With E.L.C.B. ) LIGHT CIRCUITS P/F Light circuit in pvc conduct/casing appr. thkn and duly wired 2.5 Sq .mm. swg pvc insulated copper wire along 1.5 Sq mm. swg pvc insulated wire for earthing including all assessories etc. NOS. NOS. NOS. NO.S NO.S NO.S NO.S 42 18 7 1 1 1 7 5 6 7 8 8.a) TELEPHONE POINTS (a) P/F of telephone point in pvc conduit/casing with all assessories Switches, plates etc. Complete 4 pair wire incl. making connection main Terminal outlet. S& L PVC insulated category 1 heavy duty armored cable Including making good the connections complete- Gloster / poly cab / KEI a) Size-3.5core armourd cable. ( in aluminium) b) 4 core 25 sq mm ( AC ) c) 4 core 25 sq mm ( UPS) d) 4 core 16 sq mm ( Light ) Providing & Commissioning of Accessories as per following details and making connection a) S/F OF Philips/Wipro/Bajaj recessed /surface 2x36 watt ( 2’x2’ size , FBS 300/236 P5 HF ) decorative type flurocent luminare with mirror optic complete with copper wound choke , capacitor, locable holders 36 W fluorescent lamps including connections as required. b) ) S/F of Down lighters - wipro or Philips FBH 150/218 incl 1x plc 18 W lamps. c) Wall fans 400mm sweep (Bajaj /Crompton) d) Supplying, fixing and commissioning of 305mm 1400 RPM exhaust fan complete with louver and bird guard screen with 3 core flexible wire complete as required. Crompton / bajaj make e) Patti Tube Light UPS POINTS & CIRCUITS P/F light point in pvc conduct/ casing caping 1.5mm thkns & duly wired with 3/20swg pvc insulated copper wire along with 1/18 SWG pvc insulated wire for earthing including bends, nipples, junctions M.S. switch boxes three nos. Anchor/Leader/Prokon modular range of switches & sockets complete fine finish incl. making necessary connections and start of equipment as per detail.[A] U P S Installation Input wires 4x10 sq mm copper pvc wire With 4sq mm copper pvc wire for earth In MS flexible pipe . Out put wires : 2x10 sq mm copper wire With 4 sq mm cu pvc earth in MS flexible pipe. NO.S R.ft R.ft R.ft R.ft NO.S NO.S NO.S NO.S NOS. NO.S mtr mtr. 12 80 40 40 50 16 28 9 1 4 12 20 15 9 10 10.a) 11 12 POWER POINTS: P/F power points in PVC conduit/casing caping 1.5mm thick & duly wired with 4.0 sq mm insulated Fire retardant copper wire along with 1.5 sq.mm PVC insulated wire for earthing including bends, nipples, junctions, M.S./PVC switch boxes with one nos. 15A switch and one no. 15A socket complete fine finish incl. Making necessary connection, testing and start of point per details and drawing. MAIN PANEL: P&F panel board of 18 SWG mild steel property painted spray with main switch & outgoing instrumentations- Voltmeter, Ammeter, VMASS, AMSS indicator lamps and complete internal wiring complete fine finish with connections of- MCCB 200 A /35K ( Adjustable ) 125A on load Changeover -4pole-1 100A TPM MCCB-2+1spare ( 4 Pole ) 300A Bus-Bar 4x1 63 TPM MCB – 1 ( 4 Pole ) ( The drgs of both panels to be approved by bank’s Engineer before fabrication / commissioning ) APFC Panel of appropriate size EARTHING (a) Earthing with copper earth plate 300 x6 mm x 300mm including accessories embodying by digging 5mtrs below the ground level and refilling with 6 to 10 alternate layers of salt, charcoal and providing masonary enclosure with cover plate and perforated earth pipe, funnel , copper strip1’ x 2sft ( 15’ length ) complete. (b) Earth wiring from pit to panel 6 swg copper conductor in ¾ conduit complete in all respect with all accessories etc. COMPUTER NETWORKING: Providing and fixing computer faceplates with suitable MS box and I/O units on face plates –D-LINK make for computer terminal and the following accessories- :- Single Type –Cat 5 :- Providing patch cords 1.0 Mtrslength :-Making and terminations with numbering crimping etc. of CAT-5 NO.S NO.S nos NO.S R.ft NO.S 6 1 1 2 100 12 13 14 cable. :- Supplying and laying D-LINK make CAT-5 cable for LAN networking in PVC conduits 2.0mm thick with alljunctions and bends etc. completeindependent circuit. WIRING FOR FIRE ALARM SYSTEM P/F of pvc insulated copper conductor cable 2x1.5 sq.mm in existing conduit as required 25mm Dia pvc conduit 2mm thick complete with reqired junction box in recessed / surface system as required. a) Supplying, installation, testing and commissioning of maintenance free intelligent ionization type smoke detector as required. b) supply, testing , and commissioning of response indicator. c) Supplying, installation, testing and commissioning of ROR-MF. intelligent type heat detector as required. ( at pantry ) d)Supplying, installation, testing and commissioning of duel tone electronic hooter suitable for wall mounted electronic hooter for complete as required. e)Supplying, installation, testing and commissioning of manual call box in suitable enclosure with arrangement to raise the alarm when the glass is manually broken complete as required. f)Supplying, installation, testing and commissioning of microprocess. base main fire alarm control panel of 4 zone capacity as completewith batteries, battery charger illuminated numeric diagram complete as required.1 MUSIC SYSTEM : Supplying and drawings PVC insulated copper conductor cable size 2x23/.0076 in the existing conduit as required. Supplying and fixing 120W (peak), 5 channel mixer amplifier complete including testing and commissioning as required. Supplying and fixing 4W speaker in console box in each room / specified position including connection as required. Commissioning of music system complete including testing and commissioning the same with all above accessories as required. ( with f.m. radio , Dvd / mp3 player in built ) NO.S NO.S NO.S NO.S NO.S NO.S RFT. Each Each SET 18 20 2 2 1 1 250 1 6 1 Total amount SAY RS LAC Signature & Seal of the ELEC. ENGINEER. Bid Document : Document Not available Tech. Document : Document Not available Sector : Banking, Finance & Insurance State : Rajasthan For further Information Contact: Name : Web Master E-Mail : webmaster@sbbj.co.in Phone Office : 5101673 | 
